Graphics Elements

Tachometer(TCM) - Hand Mode

General

- Show the basic information of the element

- X and Y is the location of element on screen

(top-left corner of the screen = 0,0)

element top-left corner is the reference point

- Width and Height are in pixels

Style

- Mode options: Hand / Donut / Icon / Pseudo Icon

- Direction could be Clockwise or Anticlockwise

- Start Angle is corresponding to the Min Value of content

(0° denote as the Foreground Icon original orientation)

- Sweep Angle is corresponding to the Value range

(180° denote as the Foreground Icon rotated by 180°)

Background

- Marking & Label Enable can generate the meter face details

- Base Color, Label, Minor Marking can be enable and define at here

- Label Min Value and Label Max Value is for meter face only

It show beside the Major Marking

Foreground

- Hands Type can be Line / Quadrangle / Trangle

- Hands Color is for the pointer color

- Center Mark Color is color mark at the center of the meter

Rotation Center Point

- Rotation Center Point could be Icon Center (auto select) or by manual

- Rotation Center X , Y define the the rotation reference point

Content

- VP Resource is the type of VP hold the content (VP_N16 by default)

- VP Address is the VP that hold the value

- Min Value is the minimum tachometer value to be show

(value smaller than this value will stop at the min location)

- Max Value is the maximum tachometer value to be show

(value bigger than this value will stop at the max location)

Properties Control (advance feature)

- Enable VP is none by default (element operate normally)

Select a VP for real time element control.

VP value will set to 1 as enable at power-on.

It can be disabled (hidden) by a zero value

- Hands Type VP is for changing the hand shape for visual effect

VP value will copy the above selection at power-on.

- Color VP is for changing the color for visual effect

VP value will copy the above selected Color at power-on