Graphics Elements

Tachometer(TCM) - Hand Mode

General
Show the basic information of the element
X and Y is the location of element on screen, reference point is element top-left corner
Width and Height are in pixels
top-left corner of the screen = 0,0

Style
Mode options are Hand / Donut Mix Color / Donut Discolor / Icon Rotation / Icon Open / Pseudo Icon Rotation / Pseudo Icon Open
Direction options Clockwise / CounterClockwise
Start Angle is the angular location of the min value
Sweep Angle is the effective angular area that relatively begin form the Start Angle for sensing 

Background
Marking & Label Enable can generate the meter face details
Base Color, Label, Minor Marking can be enable and define at here
Label Min Value and Label Max Value is for meter face display only. 
It show beside the Major Marking

Foreground
Hands Type options are Line / Quadrangle / Trangle
Hands Color is for the pointer hand color
Center Mark Color is color at the center of the meter

Rotation Center Point
Rotation Center options are Auto / Advance
Rotation Center X, Y define the the rotation reference point

Content
VP Resource is the type of VP to be used
VP Address is the VP for the operation
Min Value is the bottom value that can be shown
(value smaller than this value will stop at the min location)
Max Value is the top value that can be shown 
(value larger than this value will stop at the max location)

Properties Control (advance feature)
Enable VP is none by default (element operate normally)
Select a VP for real time element control. 
VP value will set to 1 as enable at power-on. It can be disabled (hidden) by a zero value
Base Color VP, Hands Color VP, Center Mark Color VP, Major Marking Color VP, Minor Marking Color VP and Label Color VP are none by default (using the above selected color)
Select a VP for real time base color adjustment
VP value will copy the above selected color at power-on
Hands Type VP, is none by default (using the above selected color)
Select a VP for real time base color adjustment
VP value will copy the above selected color at power-on